Compliance Video Library
Watch compliance training videos, equipment walkthroughs, and inspection guides. Practical visual content for gas station operators and employees.
How to Perform a UST Walkthrough Inspection
Step-by-step walkthrough of the annual inspection required by 40 CFR 280.36. What inspectors look for and how to prepare.
Spill Bucket Inspection: What to Check
Monthly spill containment bucket inspection procedure. How to test for leaks, cracks, and proper drainage.
Testing Overfill Prevention Devices
How to verify your overfill prevention equipment is functioning. Ball float valves, flapper valves, and electronic shutoffs.
ATG Alarm Responses: What Each Alarm Means
Common Veeder-Root and Franklin ATG alarms explained. What triggered them and how to respond.
Changing a Fuel Dispenser Filter
How to replace fuel dispenser filters. When to change them, what tools you need, and common mistakes.
Submersible Turbine Pump Basics
How submersible turbine pumps work, signs of failure, and when to call for service vs. replace.
Class C Operator Training Overview
What Class C operators need to know: spill response, alarm recognition, and emergency procedures.
Fuel Spill Response: First 5 Minutes
What to do immediately after a fuel spill at your station. Stop the source, contain, notify, and document.
Fire Extinguisher Use at Gas Stations
PASS technique, extinguisher types for fuel fires, and inspection requirements for station operators.
UST Record-Keeping: What to Keep and For How Long
Which compliance records are required on-site, how long to retain them, and how to organize for inspections.
Financial Responsibility Requirements Explained
What financial responsibility means for UST owners, acceptable methods, and common mistakes.
Preparing for a State Inspector Visit
What to expect during a state UST inspection. Documents to have ready, common violations, and how to respond.